BANDSAW STEEL

band-saw-steelWood working band saw steel

STELCO strip steel for the manufacture of wood bandsaws is characterized by mechanical properties combining high strength and toughness which minimize the risk of cracks in connection with spring or swage, setting good flatness and excellent straightness. Its straight and smooth edges are safe to handle.

 

Steel Grades            

 SAE-1065  C  0.60-0.70  Si 0.10-0.35  Mn 0.50-0.80  S 0.05max.  P 0.05max.
 SAE-1075  C  0.70-0.80  Si 0.10-0.35  Mn 0.50-0.80  S 0.05max. P 0.05max
 SAE-1080 C  0.75-0.85 Si 0.10-0.35 Mn 0.50-0.80 S 0.05max.  P 0.05max.

Forms of supply

Hardened and tempered strip steel in coils

Edges : Smooth Round or square

Flatness : Max. unflatness across the strip width 0.10%

Surfaces: Bright polished, Deep Blue or Yellow/ Golden/ Bronze

Mechanical Properties

Strip mm Thickness inch Tensile strength N/mm² Hardness HRC
≤1.40 ≤0.055 1450± 50 44-46

 

Deviation from Straightness(Camber)

STRIP WIDTH MM
INCH
MAXIMUM DEVIATION FROM STRAIGHTNESS
MM/0.9m
inch/3 ft
<50 <1.97 2.00 0.078
50-152 1.97-5.98 1.00 0.039

Sizes 

STELCO’S STANDARD SIZES OF BAND SAW STEEL
BRIGHT POLISHED SURFACE
Dimension (mm)
Weight (kg/m)
Dimension (mm)
Weight (kg/m)
09 x 0.50 0.035 38 x 0.60 0.178
10 x 0.50 0.039 38 x 0.70 0.208
12.5 x 0.50 0.048 44 x 0.70 0.240
12.7 x 0.50 0.049 50 x 0.70 0.273
12.5 x 0.55 0.053 50 x 0.80 0.312
12.7 x 0.55 0.054 50 x 0.90 0.351
12.7 x 0.60 0.059
50 x 1.00
0.391
12.7 x 0.70 0.069
57 x 0.90
0.401
15.8 x 0.50 0.061 57 x 1.00 0.445
15.8 x 0.55 0.067
63 x 1.00
0.492
19 x 0.50 0.074 76 x 1.00 0.594
19 x 0.55 0.081 76 x 1.20 0.713
19 x 0.60 0.089
100 x 1.20
0.938
19 x 0.70 0.104
127 x 1.20
1.191
25 x 0.55 0.107 152 x 1.40 1.664
31 x 0.55 0.133

All above sizes can be supplied in Deep blue, Yellow/ Golden/ Bronze surface.

Any other size is available on request.

Marking

The strips can be supplied branded as “STELCO Special Band Saw Steel”